Wireless Remote Controls
ACS 146R
ACS-146R - PROFESSIONAL WIRELESS FOUR CHANNEL KEELOQ® ROLLING CODE REMOTE CONTROL SET
Purpose
Wireless four-channel multi-functional receiver ACS-146R, operating in conjunction with two hand-held push-button transmitters, provides the remote control of any electronic equipment:
-
Electrical gates
-
Sliding doors
-
Electromagnetic locks
-
Automatic barriers
-
Electrical curtains
-
Lighting fixtures
The remote control set may be used as a personal PANIC BUTTON
in security systems for triggering any type of alarm.
Features
-
Four independent channels
-
Five operating modes of each receiver channel:
1. Panic button mode (Security)
2. Switching mode (ON/OFF)
3. Hold mode (Continuous)
4. Pulse mode - 1 second
5. Switch on period mode (1-300 sec)
-
Power input: AC/DC 24V
-
Receiving range in open space - up to 500 meters
-
KEELOQ® rolling code technology
-
Maximum quantity of remote controls learning the receiver – 330
-
Programming the ON/OFF period for the desired time from 1 to 300 sec
-
Unauthorized access protection (in "Panic Button" mode)
-
Last event memory: 30 min (in "Panic Button" mode)
-
Alarm is triggered when the electric power supply is disconnected (in "Panic Button" mode)
KEELOQ® Rolling Code Technology
The multi-functional remote control sets use KEELOQ® rolling code technology, ensuring the highest level of security by code combination programmable but read-protected. The combinations of different codes transmitted by remote controls prevent radio scanning and unauthorized access.
Receiving Range
The operating range of the hand-held remote controls depends on the mounting location of the receiver.
Various obstructions, environmental factors, radio-frequency and electromagnetic sources might influence the emission of radio-signal and as a result, might shorten the receiving range. For optimal radio-signal reception: mount the receiver at least 1.5 meter above the ground, as far as possible from any radio frequency and electromagnetic sources.
Specifications