top of page

Wireless Remote Controls

ACS 101



Wireless one-channel multi purpose alarm system set designed for use as a PANIC BUTTON in security systems and for remote control of any electronic equipment:

  • Electrical gates

  • Sliding doors

  • Electromagnetic locks

  • Automatic barriers

  • Electrical curtains

  • Lighting fixtures

  • Arming/disarming of alarm systems, etc.


  • Four operating modes of the receiver:

      1. Panic button mode (Security)
      2. Switching mode (ON/OFF)
      3. Hold mode (Continuous)
      4. Pulse mode - 1 second

  • Receiving range in open space - up to 250 meters

  • Maximum quantity of remote controls learning the receiver – 680

  • Easy learning of the receiver by additional remote controls

  • Unauthorized access protection (in “Panic Button” mode)

  • Last event memory: 30 min (in “Panic Button” mode)

  • Alarm is triggered when the electric power supply is disconnected 
    (in “Panic Button” mode) 

Receiving Range

The operating range of the hand-held remote controls depends on the mounting location of the receiver. 
Various obstructions, environmental factors, radio-frequency and electromagnetic sources might influence the emission of radio-signal and as a result, might shorten the receiving range. For optimal radio-signal reception: mount the receiver at least 1.5 meter above the ground, as far as possible from any radio frequency and electromagnetic sources.


bottom of page