product1

ACS 126R

ACSTM-126R - PROFESSIONAL WIRELESS DUAL CHANNEL KEELOQ® CODE HOPPING REMOTE CONTROL SET


PURPOSE

The wireless dual-channel multifunctional receiver ACS-126R, operating in conjunction with two hand-held push-button transmitters, provides the remote control of any electronic equipment: 

  • ELECTRICAL GATESACS-126R
  • SLIDING DOORS
  • ELECTROMAGNETIC LOCKS
  • AUTOMATIC BARRIERS
  • ELECTRICAL CURTAINS
  • LIGHTING FIXTURES, etc.

The remote control sets may be used as a personal PANIC BUTTON
in security systems for creating any type of alarm.


FEATURES

  • TWO INDEPENDENT CHANNEL.
  • FIVE OPERATING MODES OF EACH RECEIVER CHANNEL:

1. PULSE MODE - 1SECOND 
2. SWITCH ON PERIOD MODE (1 – 300 sec)
3. SWITCHING MODE (ON/OFF)
4. HOLD MODE (CONTINUOUS)
5. PANIC BUTTON MODE (SECURITY)

  • Power input: AC/DC 24V
  • Receiving range in open space - up to 500 meters
  • KEELOQ® code hopping technology
  • Maximum quantity of remote controls learning the receiver – 330
  • Programming the ON/OFF period for the desired time from 1 to 300 sec
  • Removable receiver memory device keeps all previously memorized codes
  • Unauthorized access protection (in “Panic Button” mode)
  • Last event memory: 30min (in “Panic Button” mode)
  • The alarm comes on when the electric power supply is disconnected
    (in “Panic Button” mode)         


KEELOQ® CODE HOPPING TECHNOLOGY

The multifunctional remote control sets use KEELOQ® code hopping technology, ensuring the highest level of security by code combination programmable but read-protected. The combinations of different codes transmitted by remote controls prevent radio scaning and unauthorized access.


RECEIVING
RANGE

The operating range of the hand-held remote controls depends on the mounting location of the receiver.
The various obstructions, the environmental factors, the radio-frequency and electromagnetic sources might influence the emission of radio-signal and as a result, might shorten the receiving range. For optimal radio-signal reception: mount the receiver at least 1.5 meter above the ground, as far as possible from any radio frequency and electromagnetic sources.


TECHNICAL SPECIFICATIONS

Power input: AC/DC 24V ± 10%; 
Current consumption: 
Stand-by mode: 19mA/24V; 
Active mode: 42mA/24V; 
Receiving range in open space: up to 500m; 
Security code: “KEELOQ”;
Operating frequency: 433.92MHz ± 50kHz; 
Radiated power: ≤10mW; 
Memory capacity: 330 codes; 
Alarm period in panic button mode: 3sec; 
Warm up period 0.5sec; 
Dry contact relay: DC30V/1.0A; DC60V/0.3A; AC125V/0.5A;
Opening protection in panic button mode: TAMPER SWITCH;
Last event memory in panic button mode: 30 min;
Operating temperature range: -20ºC +50ºC; 
Storage temperature range: -40ºC +80ºC; 
Dimensions: 85mm x 40mm x 20mm; 
Weight: 129gr.


WARRANTY

GSN Electronic Company Ltd., warrants the product to be free from defects in materials and workmanship under condition of observance of service regulations and to be repaired or replaced under absence of mechanical damages for a limited period of five years from the date of sale.

CE
 

PRODUCTS AND TRADEMARKS OF GSN ELECTRONIC COMPANY LTD ARE COVERED BY ONE OR MORE OF THE FOLLOWING PATENTS IN DIFFERENT COUNTRIES IN THE WORLD:

flags

To see more information click lupa


Products